Latest news! ATTN automatic dew-point and temperature control system
ATTN for LUXOR A dryers – 80 to 2400 litres capacity
With immediate effect, the ATTN automatic temperature and dew-point control system option is now available throughout the entire LUXOR A dryer range. ATTN, maintains a constant dew-point of the process air. It is essential for materials that require predefined moisture content and will be damaged if over dried as a result of too low dew-points. The dew-point of the process air is constantly regulated and documented to ensure regulation precision within +/- one degree.
ATTN has been designed to maintain a constant dew-point of the process air for drying plastic granules. It is generally installed in the dry air generator and can only be set to one specific dew-point between -30°C and +5°C. This pre-set dew-point value is then stored and maintained. This principle requires that the amount of moisture in the process return air is higher than the set dew-point. Under normal atmospheric conditions, this is the case with a control dew-point between -30°C and -5°C.
With ATTN, all drying bins of a dry air generator are always operating with process air at the respective dew-point set value. This is particularly true for single-bin stations. However, multi-bin stations can also be equipped with this option.
ATTN and ETA plus® - a useful combination
ATTN keeps the dew-point constant, ETA plus® controls the air volume and the drying temperature. The combination of ATTN and ETA plus ® is possible and makes sense, since the control of air volume and the automatic adjustment of the temperature optimally supports proper drying at a constant dew-point: ATTN keeps the dew-point constant while ETA plus®