FAKUMA 2021

motan-colortronic presents new dosing and mixing units as well as a new dry air dryer

05/10/2021

From October 12th to 16th, 2021 motan-colortronic will be again at FAKUMA 2021 in Friedrichshafen. At the usual stand B1-1111 in hall B1, the peripheral supplier is exhibiting a new LUXOR SG 50 dry air dryer for plastic granulate as well as the new dosing and mixing units MINICOLOR SG V and GRAVICOLOR 110. motan-colortronic enables its customers to have a safe visit thanks to a well thought-out hygiene concept and vaccinated or recovered employees who will be working at the stand at FAKUMA.

 

MINICOLOR SG V - Volumetric dosing and mixing unit for granules

With the MINICOLOR SG V, motan introduces a new variant of the volumetric dosing and mixing unit series. The unit covers all the important requirements for the dosing of additives to the highest level. The MINICOLOR SG V guarantees excellent mixing quality with the highest dosing and repeat accuracy. The dosing and mixing unit is mounted directly on the feed opening of the processing machine and is therefore extremely space-saving.

The user-friendly microprocessor control of the MINICOLOR SG V can either be used for injection moulding applications or extrusion operation. The modern 7" graphic display visualizes the dosing rates and supports calibration. Dosing speed is calculated automatically according to the calibrated weight and recipe.

 

 

GRAVICOLOR 110 – Dosing granulate more intelligently with innovative slider technology

The new gravimetric batch dosing and mixing unit for granules GRAVICOLOR 110 is specially designed for injection moulding, blow moulding and extrusion processes. With the GRAVICOLOR 110, up to four different components can be mixed precisely and with the highest recipe accuracy.

All components are dosed with a specially designed vertical slider. In the event of a recipe or material change, the existing material hopper can continue to be used through the variable slider opening. The slide opening is flexibly adjusted by input on the control panel by a stepper motor.

The integrated IntelliBlend analysis function makes it possible to precisely record and document the recipe, material and operating environment. In this way, extremely accurate and consistent dosing can be achieved for the correct recipe as well as for low additive use.

 

 

LUXOR SG 50

The LUXOR SG 50 is the first mobile and compact dry air dryer of the new LUXOR SG series. These dryers offer an ideal price-performance ratio for standard applications in the drying of plastic granulate.

The LUXOR SG 50 dry air generator will come with a dry air capacity of 50 m³ / h and is connected to a single drying bin with 150 liters. The dryer is designed for energy-efficient drying and has additional functions such as dew point display and the ecoPROTECT material protection function.

A modern, integrated microprocessor control manages the dry air generator and the drying bin. Thanks to a modern 7" graphic display, all drying functions can be shown and monitored in a user-friendly way.

 

 

MOISTURE MINDER™ - Measuring the remaining moisture of plastic granulate

With the help of the Moisture Minder™ system, the humidity level of plastic granules can be measured continuously, efficiently and accurately. The sensor, which can be mounted directly under the drying bin, indicates the current moisture concentration of the plastic granulate. This makes any faults that might occur in the drying process immediately visible. In addition, a trend display for the remaining moisture enables continuous process monitoring.